6.2 block freshly machined Denton, Texas
#1
6.2 block freshly machined Denton, Texas
Cast iron block bored to 4.065 LS3/L92 bore size, can be used with 24 or 58 crank wheel. Freshly machined, new cam bearings, read to assemble. $800
Edit: Block is a LY6 block, machined to 4.065 bore diameter, yes its not a typo 4.065 bore, same as L92 or LS3 block, just in cast iron form. Yes, can be used in a 99-06 truck by using a 24 tooth crank wheel and extending the cam and knock sensor wires.
http://i195.photobucket.com/albums/z...g/IMAG0929.jpg
Edit: Block is a LY6 block, machined to 4.065 bore diameter, yes its not a typo 4.065 bore, same as L92 or LS3 block, just in cast iron form. Yes, can be used in a 99-06 truck by using a 24 tooth crank wheel and extending the cam and knock sensor wires.
http://i195.photobucket.com/albums/z...g/IMAG0929.jpg
Last edited by TXSZ66AVLANCHE; 01-26-2013 at 09:14 AM.
Thread
Thread Starter
Forum
Replies
Last Post
zblee
GM Engine & Exhaust Performance
3
11-11-2015 12:41 AM
Pontiac Derek
GM Parts Classifieds
3
09-19-2015 01:49 PM
lxcoupe
INTERNAL ENGINE MODIFICATIONS
4
09-11-2015 03:17 PM