NX express 90mm 4 bolt black annodized wet plate
everyrbing else minus pure solenoid is DynoTune
10# bottle
bottle warmer
3 stage programmable window switch
250 shot solenoid
150 shot solenoid
dry shot nozzle
fuel solinoid
NOS purge solenoid
relays
lines
wires
bottle mount
jets
switches
instructions

ran an the 50 dry shot off the line, in the air box of my NBS where the air filter check/gauge went and about a 150 wet shot through the plate. Did all this on a stock 4.8 with factory G80 locker. Got sick of filling bottle so build a 416 lq4 stroker. Before I had a chance to run this set up through the 416 and new Detroit Truetrac rear end, let a friend drive the truck and he spun a few mains. Will make your truck move. FAST. $550 plus ride. The 90mm plate is $300 new. Only thing this would need is possibly some extra wire depending on how you would wire it.

Do you have any pictures? Interested. Thanks Jim

https://cimg0.ibsrv.net/gimg/www.per...605302e60.jpeg
Bottle, heater, window switch and the fogger nozzle are not in pic I can get some pics of those tomorrow, there in truck. I also have all the wires set up with insulated spade connectors so should be fairly strait forward when one wires it up.

Switches are in truck as well. Just haven't yanked them out yet.