specs on 5.3 deck height etc...
Jul 16, 2005 | 01:01 PM
#1
specs on 5.3 deck height etc...
found a cool accel sheet for cam comparison and dyn compression ratios
need to know some stock specs though on a 5.3
rod length?
deck height (amount piston comes out of hole)
compressed mls gasket thickness
cylinder head chamber volume
piston dish -cc
Once Im done Im gonna post up a sheet so every one will know exactly how much compression they are gaining by milling thier heads, changing gaskets, changine pistons etc...
need to know some stock specs though on a 5.3
rod length?
deck height (amount piston comes out of hole)
compressed mls gasket thickness
cylinder head chamber volume
piston dish -cc
Once Im done Im gonna post up a sheet so every one will know exactly how much compression they are gaining by milling thier heads, changing gaskets, changine pistons etc...
Jul 16, 2005 | 02:56 PM
#2
Not sure on the gasket. It may be .054? This is off the top of my head so if I'm wrong, I apoligize.
rod length?
6.098
deck height (amount piston comes out of hole)
.008
compressed mls gasket thickness
cylinder head chamber volume
61.15
piston dish -cc
-8
6.098
deck height (amount piston comes out of hole)
.008
compressed mls gasket thickness
cylinder head chamber volume
61.15
piston dish -cc
-8
Thread
Thread Starter
Forum
Replies
Last Post
Offroadunleashed
Trucks and SUV Classifieds
0
Jul 20, 2015 02:25 PM
