We have been working on severly modifying the wipple blower kit and desining a new cam shaft and intake and cylinder heades for about five months now and we have made every thing work with the factory computer that we reprogram and we replace the 8 factory injectors with our new ones so we have got the boost up to 10 pound at the motor now and this is with our own custom water to air intercooler witch flows about 1550 cfm and our fuel manegment is much better now with out all the after market stuff that comes with the whippel kit this all started with a customer who wanted the bast performance he could get with out loosing good driveability now where just about finished with the fine tuning i am wondering if any one out there is wanting serious performance stuff for the 8.1 if so maby will release a kit we also can do the complete job for you if you need more info please feel free to email or call the shop 727-344-1800 i whould like to know if there is intrest out there about this kit thank you for your time ps so far with out the heads or intake package or our new inter cooler just the stuff we have done to the blower and the cam and fuel managmentwith out a good tune yet we made 87hp and 196pd of torque more than our first two pulles with the stock wipple kitnot bad for only 14 degrres total timing and 10-1 air fuel on the dyno jet should do great with good timing and lean it out will let you know where going to the dyno to finish tuning on thursday and friday we whent real conservitivly the first time just to make shure the stock motor whould hold up oh plus we only ran 6pd off boost last time when we go on thursday will have our intercooler and 10pd of boost see you later and thanks for your input on this kits populerity

 

holly smokes now that is a long sentence!!!!

i don't have a 8.1 but i do have a 5.3 with whipple and am hoping to get more out of it, if any of the parts you are puting together would work for me i would be interested, especialy the intercooler

 

dont know yet if it will fit the 5.3 but i can build any thing you whant we do have the complete CNC cylender heads and cam package with custom computor program for the 5.3 and the 6.0 motor for normaly aspirrated or super charged give me a call at (727) 344-1800 or give me your number and i can give you a lot of options it will be easer by phone and faster im sorry guys but i cant type for crap but i can use a phone thanks for the reply hope you all have a good day

 

Is this a site sponsor ? Sorry, need to contact site Admin to advertise shops here. E-mail me regarding the policy if you want.

Greg

<small>[ April 25, 2002, 01:23 PM: Message edited by: Fast4.8 ]</small>