finished 6.0 swap this weekend
#1
Thread Starter
TECH Fanatic
iTrader: (2)
Joined: Feb 2006
Posts: 1,089
Likes: 19
From: NewBern NC/Lake Havasu City AZ
07 6.0 lq4
custom grind Brett Bauer Racing cam
Blue Vitan seals
Pac springs/ pushrods
high volume oil pump
upgraded timing chain
Vortech V2 blower
Circle D 3200
Truck is awaiting new tune, but is up and running pretty nice.
custom grind Brett Bauer Racing cam
Blue Vitan seals
Pac springs/ pushrods
high volume oil pump
upgraded timing chain
Vortech V2 blower
Circle D 3200
Truck is awaiting new tune, but is up and running pretty nice.
#5
Thread Starter
TECH Fanatic
iTrader: (2)
Joined: Feb 2006
Posts: 1,089
Likes: 19
From: NewBern NC/Lake Havasu City AZ
tuner did say im at the limit of my maf, so need to do a 2 bar setup. any ideas? Intercooler should be here in the next week or so too. Going to pulley down one size and pin the crank aswell. My shifts are now fixed in the tune, so i can shift 3-4 under wot, thats why previous best with the 5.3 was 13.2 at 92, hopefully with this 6.0 and stall, it will do much better.
Thread
Thread Starter
Forum
Replies
Last Post
GrooveCityZ71
GM Engine & Exhaust Performance
7
Aug 31, 2015 12:05 PM




