What all comes with the Performabuilt II Transmission
06-07-2018, 06:38 PM
#1
100% Redneck
Thread Starter
What all comes with the Performabuilt II Transmission
Ordered the level II Monday and was wondering what comes with the trans. Mostly concerned about the Jiffy Tite cooling line quick connects, sensors and the tailshaft bushing. I know I'll need fluid... is there anything else that comes to mind I'll need to pickup?
Removed the bellhousing and tail housing then pressure washed today. Had to drill out the one bellhousing bolt next to the dipstick as there wasn't a good place to heat with the torch, so that one stripped
Removed the bellhousing and tail housing then pressure washed today. Had to drill out the one bellhousing bolt next to the dipstick as there wasn't a good place to heat with the torch, so that one stripped
06-12-2018, 05:28 PM
#2
100% Redneck
Thread Starter
Performabuilt level II came with cooling line quick connects (no jiffy tite clips), rear seal, tailshaft seal, dipstick seal, Hayden 1403 cooler.
The 4L60 shipped in a heat formed Styrofoam shell that protected very well, but was a some-bish to remove from.
The 4L60 shipped in a heat formed Styrofoam shell that protected very well, but was a some-bish to remove from.
07-04-2018, 11:24 AM
#3
trans
I talked to them about the Level II ,
I live about 2-3hrs from them.
I picked up a trans for them to build,
it seems my truck has a weird 4L60
in it. they seemed to know about the weird
electrical setup in it. going to drop it off in the fall.
I live about 2-3hrs from them.
I picked up a trans for them to build,
it seems my truck has a weird 4L60
in it. they seemed to know about the weird
electrical setup in it. going to drop it off in the fall.
Thread
Thread Starter
Forum
Replies
Last Post
blazinblue
GM Parts Classifieds
21
10-31-2011 08:56 PM
performabuilt
GM Drivetrain & Suspension
7
12-22-2007 11:14 AM
Silent Thunder
GMT 800 & Older GM General Discussion
2
04-04-2006 11:44 PM