turboal1

Just thought i show off these bad boys that i had made for the rear
there stretched to 10"

terravast4

iTrader: (25)

where were these widened at? how much was it?

turboal1

I guess i should have put the shops info with the pics
Wheel Works
1703 Rt-130
Burlington NJ 08016
1-609-387-4488
Tim Smith
I supplied the 4 wheels and dropped
them off and picked them up. no shipping charge.
Call him and discuss what you want for a price.
mine were $600 bucks for the pair. I think that
was a good price.He has been doing wheels for
about 40 yrs.

terravast4

iTrader: (25)

did you drop off all 4 so he could pick which were more true out of the 4?

turboal1

I gave him 4 so he could cut off the sections
to get the size i wanted. I didn't know he
could make a spacer section to weld in
to get the right width. all 4 were good wheels.
they were a take off set from e-bay tire shop.
he trues them after he finishes welding them.
I hope i didn't get carried away and make them
to wide for my truck. I originally thought 9'
would be fine for the 275x40x18 tires i want
to run.

terravast4

iTrader: (25)

im gonna run a 4-link so im losing the leaf springs. I still need to measure but im hoping to fit a 12" rim in there

madmann26

iTrader: (7)

I had 4 p27 code wheels widened by James @ WeldCraft Wheels for $600.

Welcome to Weldcraft Wheels | Weldcraft Wheels

Mark Johnson

iTrader: (1)

where ya gonna get the coils? Gonna hack the back half of an Avalanche or a Tahoe...………………..

randeez

shouldve had him welded up the leftovers for some front skinnys

turboal1

I mite need the leftovers to make a set of 9"
wheels if the 10's are to big and won't fit.