Belltech Front Spring Help
#1
Belltech Front Spring Help
Guys, I'm installing the Belltech 4/6 drop. I noticed the springs came with 1" lift plastic spacers. Are you guys installing these or leaving them out?
#4
TECH Enthusiast
Not all trucks "lean" and it's not limited just to Chevy's. However what you may have there are spacers that Belltech sends with their springs now as they seem to have consolidated a few part #'s and that spacer equates to 1", I can't remember if last time I looked those springs were either 1" or 2" drop and you pull the spacer for 2" (obviously) or they're 2"/3" drop.
Richard
Richard
The following users liked this post:
Burnett03 (07-11-2018)
#5
Not all trucks "lean" and it's not limited just to Chevy's. However what you may have there are spacers that Belltech sends with their springs now as they seem to have consolidated a few part #'s and that spacer equates to 1", I can't remember if last time I looked those springs were either 1" or 2" drop and you pull the spacer for 2" (obviously) or they're 2"/3" drop.
Richard
Richard
Thread
Thread Starter
Forum
Replies
Last Post
MarineBlue03GMC
GM Drivetrain & Suspension
0
03-21-2011 09:40 PM
BLOWN 364
GM Parts Classifieds
5
01-08-2010 04:32 PM