4l80e dipstick and tube
05-14-2019, 01:40 PM
#1
Staging Lane
Thread Starter
Join Date: Feb 2012
Location: Hamilton ontario
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
4l80e dipstick and tube
Hey guys
I did a 4l80e swap in my truck and used an 05 2500 gas/80e dipstick tube. Going by what proper spec should be. Full Mark's warm should be 1/4" above pan rail. When I put the dipstick in with the pan off. It's no where near that. It's way below. Should I go with the way it's designed and go with the full Mark's on the stick? Is anyone elses like that thats used an 05 tube and dipstick?
I did a 4l80e swap in my truck and used an 05 2500 gas/80e dipstick tube. Going by what proper spec should be. Full Mark's warm should be 1/4" above pan rail. When I put the dipstick in with the pan off. It's no where near that. It's way below. Should I go with the way it's designed and go with the full Mark's on the stick? Is anyone elses like that thats used an 05 tube and dipstick?
Thread
Thread Starter
Forum
Replies
Last Post