GMJim

It's called the 925M22I. Here is the link but they don't sell the bracket I'm using. http://www.setrabusa.com/oilcoolers.htm
I got it from a guy named Mike Lovrich at Inglewood Transmission Service. 4919 W Century Blvd, # W Inglewood, CA 90304-1312
Shop 7 to 5 (310) 674-4400 after 5 Cell 310-918-9678

I don't know if he makes the brackets or buys them from somebody else. These coolers are for race cars and they aren't cheap but I was tired looking for a clean bolt on piece and decided to spend the extra bucks for a top line cooler. One thing I learned along the way is that Long makes the factory GM cooler and the guy I spoke to at Long says it's more efficient than the 8X11X1-1/2 stacked plate coolers you buy from B&M and other places that are also made by Long. Old technology he says. Anyway this Setrab cooler is about 14"WX7-1/2"HX2"Thick and will soak up 32,000 btu's. He has these for quite a few applications.

Phantom

iTrader: (16)

$300!!!!!!!!!!!!!!!!!!!!!!

GMJim

I haul a 8000 pound car hauler with my ECSB VortecMax. The cooler will be cheaper than getting the tranny rebuilt!