4L60e gurus...Trans-go hd-2 shiftkit ?
 

trying to put the new reverse boost valve from a transgo hd2 shift kit in...its longer than the stocker and we can't get the snap ring to fit in the groove...what shall we do?

Stocker on the right. Tyler can machine the new one down on his lathe if he needs to. Even with the springs out, it will not get down to the groove for the snap ring.

http://i24.photobucket.com/albums/c3...10a_276228.jpg

welcome back?

yessir:D

You bought the wrong one. They come in two different lengths for the old and new style pumps.

This might help you a little, idk: http://www.sonnax.com/part_summary.php?id=4247&pl=3

thats kinda what we figured...so say hypothetically we machined that down...would it work?

i wouldn't risk it and just exchange for the right part.

yep hes callin tomorrow. tryin to get this together just to stick in my truck to have my truck rollin again..

You can definitely machine it. I had to do this before the valve was even available! IIRC you need to remove .090-.100. Vince

So say in the pic I can machine the top part down .090-.100 and be fine. The part on the inside, leave it be?

Yes leave the valve alone just modify the sleeve.

This isn't on Danny's is it?

no this is his stock trans that we pulled out, just stickin it in mine.

anyone want to take bets on how long it lasts

.... well drill the plate to the smallest holes, put one spacer in the servo . . .

With a stock converter too :D.. I need to stop driving my company truck around and with how things are it may get sold..tryin to get mine back together quick

put the stock cam back in . . . then it might have a chance

Shit! That trans has 57000 miles and never missed a beat! My truck makes more power than his :D