Atomic

iTrader: (42)

Hey guys, a couple of you expressed interest in having a crossmember made similiar to mine that a friend did for me. I talked to him today and he said he would be willing to add the bracing and stuff so it would work with a 4l80e and 4l60e (like mine). He thinks around $80 to convert it for you plus shipping, or he could probably make you a new one for as a spare for more. PM me or post in here if you are interested in him doing this. Im trying to see if there actually is real interest or not. At least 5 guys need to be interested for it to be worthwhile.

(click for bigger pics)

1bad2k

iTrader: (11)

So this is instead of cutting both ends and moving the entire center section back?

Atomic

iTrader: (42)

Yea, but I dont think I can advertise these due to the sponsor policy. PM me if you want more details.

Coban

iTrader: (14)

The 2wd crossmember must be moved back 6 inches or so. I don't think this technique would work in that case.

brent1976

iTrader: (1)

I just noticed this section today. I don't know if it has been there for a while and I didn't notice it, but it say "member made tools and parts classifieds".

https://www.performancetrucks.net/fo...play.php?f=197

1bad2k

iTrader: (11)

Thats what I was thinking of. Hmmm....

fredkj3

iTrader: (1)

yea what he is doing is for 4wd... but your guy should have no issues doing the 2wd one...

i used another crossmember as a jig with some allthread holding them together so when i welded it it couldnt move and was all square