02 Silverado 2wd - 4l80e Swap, 2" or 6" Crossmember Hack?
Just as the title states, I've searched and I keep finding both answers about cutting and moving back the center section of the crossmember. I'm thinking that's the measurements for both the 4x4 and the 2wd but I'm I unsure which is which. I thought it was 6" but I just want to double check as I won't be able to have my truck on site during the cutting/rewelding as we don't have a welder at our shop :argh: .... so I wanna get it right the first time. Thanks guys
RyanR |
I'd just get a crossmember from dirt track racer. It's a nice piece and everything lines up perfectly. Little bit of weight savings vs modding the factory one.
|
Originally Posted by zero2sixT
(Post 5357455)
I'd just get a crossmember from dirt track racer. It's a nice piece and everything lines up perfectly. Little bit of weight savings vs modding the factory one.
|
That sounds like way too much to me... but I could be wrong.
|
1 Attachment(s)
Originally Posted by Vortec350ss
(Post 5357461)
That sounds like way too much to me... but I could be wrong.
Attachment 85776 The pics shows 2.5 from front to front but the links refer to it as 6" https://www.performancetrucks.net/forums/gm-drivetrain-suspension-22/pic-cross-member-4l80-convert-430283/ https://www.performancetrucks.net/forums/gm-drivetrain-suspension-22/4-8-4l60e-lq9-4l80e-445713/ |
All times are GMT -5. The time now is 08:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands