litreddevil

iTrader: (4)

so i would like to know what are everyones goals and if you'll are changing anything.


i will start by saying i am working on get my new heads and getting all stuff to put the bo on in feb.

thunder550

iTrader: (70)

Get the 408 running on 14 psi and hit 10's

trever1t

iTrader: (14)

Hit lower 12's on this setup and start piecing together a larger bore.

Dock Rocker

Find some traction somewhere (maby santa will bring me some for christmas!) I want to get into the 13's with motor only my best is a 14.36 with major traction issues and an awful light. Then I want to spray my way into the 12's. After that I dont know.

MR Marine

Get all 8 cylinders back up to 200 psi of compression, some antifriction coatings and some ceramic thermal barrier on piston tops and chambers.Then maybe some more weight loss . Go back to a flat hood.

TXsilverado

iTrader: (19)

mildly worked over 243 heads on the LS1, cam it, and hopefully make high 12's on motor. then spray to see if i can dip into 11's...hopefully im not asking too much lol.

TouchOfEvil04

iTrader: (13)

Have my heads worked over possible get some fordged rods/pistons....still not sure if that one is worth the investment at this point.
Get a 3200 stall and hopefully run some 12's on motor.
Then i will get me some gogo juice and maybe hit 11's.
Eventually if it's a good year...aka:no more broken trannies....do a intake swap as well.
Oh i'll have to get some traction at some point in there as well lol.

1ImperialSS

iTrader: (5)

new motor, 6.0
new trans, century stg II
nitrous, Harris 150
tru-trac

99Silverado5.3

iTrader: (7)

my goal is to hit 12s stock internal on da juice!!! I would be really happy if I pull this off

NegraRCSB2X4auto

iTrader: (15)

My goal to hit 12's any way i can with out the bottle this year I'll be happy if i can just get a stall and a rebuilt tranny.