burbalanche

iTrader: (3)

I was running aftermarket fast rails on my stock truck intake and me nor my tuner could get them to work and seal.my injectors just kept leaking like crazy, granted i didnt wanna spend all kinds of money and pay him to take my truck intake off and make some brackets and stuff so i went back to stock rails per him.he told me hes done plenty of 1krwhp builds with stock rails so i just saved my money.

cpolaris502

iTrader: (1)

Update on this, got it all figued out and have all my parts.

I got the 2 Walbro 450s, -10 feed and -8 return, aftermarket rails, and running an aeromotive regulator.





And then going to go with Fuelinjectorconnection's 1000cc injectors.

Gadgetized

iTrader: (9)

I just saw this thread as I don't come int he fuel section much. That is basically my setup. I have -10 feed, -8 return, aftermarket rails, dual 450's, with a regulator after the rails. I ended up going with Bosch 160lb injectors. I got them new off of eBay from a guy that gave me a good package deal on 2 pumps and injectors.

GMCtrk

iTrader: (27)

How do those 160s act? Just wondering how they are compared to the Bosch 2000 cc injectors since they're almost identical in price.

Gadgetized

iTrader: (9)

I really like them. I had to lower the min pulse width down, but they work great now. I will be getting another set for my next build.

oakley6575

iTrader: (5)

OP, are those terminal posts on the hat?

cpolaris502

iTrader: (1)

Yes, one ground and two +12v. 10-24 threaded rod, sandwiching plastic discs with an O-ring. Going to solder ring terminals to the wires on top, heat shrink and glob some silicone over them to protect them from the environment.

oakley6575

iTrader: (5)

Where did you get the plastic o-ringed pieces?

cpolaris502

iTrader: (1)

They were custom made, it pays to know people There's a possibility that more can be available...

zblee

how did those ebay rails work out for you? they work with factory truck injectors or brackets are made for taller injectors?