New gauge pod set up for 1slow01z71 :)
May 6, 2009 | 06:32 PM
#11
May 6, 2009 | 06:40 PM
#12
Raw aluminum 150.00
Black anodized 175.00 5+ are needed so not to be charged a lot fee. If you want a different color no problem there is just a lot fee that comes into play if that color is less then 5 pc.
A deposit of 50.00 is required from at least 15 people. Deliver time is 4-6 weeks.
Custom laser marking will be priced depending on the amount of marking.
Black anodized 175.00 5+ are needed so not to be charged a lot fee. If you want a different color no problem there is just a lot fee that comes into play if that color is less then 5 pc.
A deposit of 50.00 is required from at least 15 people. Deliver time is 4-6 weeks.
Custom laser marking will be priced depending on the amount of marking.
May 7, 2009 | 04:15 PM
#16
You can see a gauge perfectly fine where its at
Its not like you are going to be staring at the gauge the whole time while your driving anyway. Like I said before I also didnt want any gauges on the a-pilar since they attract thieves and people wanting to race all the time.
Its not like you are going to be staring at the gauge the whole time while your driving anyway. Like I said before I also didnt want any gauges on the a-pilar since they attract thieves and people wanting to race all the time.
May 8, 2009 | 02:37 PM
#18
You cut the big pocket out, and this slides in, it has a piece of angle on each side behind the bezel part that snugs it up to keep from popping out. Ill look and see if I can find osme pictures from the PMs Rick sent me.
