5.3 stock w turbo questions
 

I had a 2010 SS L99 Camaro that I had a 76 mm Turbonetics ready made kit for the car made 499/566 at the tires on a low reading dyno car went 11.98 on street tires at 121mph .
Motor was bone stock and it survived the driving I did with it. Its now owned by a friend and its doing fine.
I was pretty happy with the car but it got sold to put a pool in the yard for my sons.
Getting the itch to maybe put a turbo on my truck or twins. I'm not looking to go nuts its a daily driver. I probably wont take it to the track much and will plan to run a safe tune.
My question how will a stock 5.3 hold up with a mildly tuned turbo set up ? Id be thrilled with 450-500 at the tires.
Also does anyone recommend a certain kit ? ive looked at On3 and Speed engineering they both look pretty good to me
Thnx in advance
2003 Sierra 5.3 373 posi stock

A stock engine will do exactly that without any real issue at all. That power level is perfect for a daily driver on that specific engine.

Just do the normal upgrades like MAP sensor, fuel pump, injectors. I'd do some better valve springs but it's not required.

Trick or KB racing for a turbo kit would be my first options. On3 doesn't get the best rep and haven't seen anyone running the SE kits yet.

Don't forget to remember that your stock 4L60e won't like the 200whp bump and the stock G80 should be upgraded.

Stock 5.3 will easily hold it. I'd do injectors maybe an in tank pump if it's not flex fuel and valve springs to keep the valves closing under boost. Probably don't even need hardened push rods although a small conservative cam and kit would be nice and give about 50 hp with the turbo. My fave by far would be our sponsor Trick turbo.

Thanks so much for the info.
Going to look at Trick and try to figure out how much money it would run.

Why not ask him for a quote. He is on this site and currently online.

https://www.performancetrucks.net/fo...ckturbo-72448/

@TrickTurbo Help this guy out please.

Your Welcome!
I bought my twin turbo project truck partialy finished. Had I started from scratch, I would have definitely gone with your stuff!!!
I really like the Cast manifolds you have.

will do thnx

I ran 12 psi on a bone stock 5.3 for a couple years. Never had any issues. My stock 6l80 is on it's way out. Truck is an 09 ccsb 4x4 running a trick performance stage 3 kit I believe. I drive my truck every day. You cant go wrong with the quality of these kits. Keep that in mind before deciding on a cheap on3 vs trick kit. Currently Rick is building my cold pipes for my twin setup :)

I looked at the trick kit and I like what I see a lot. I have to decide what is my next project LS swap my 69 Camaro or build my truck.
Going to call trick and speak to them Monday. Thnx for all the replies guys.