stock 6.0 lq4 numbers
im gonna be taking my truck to get a dyno tune in a few hours so ill post up the before and after, its just a plain lq4 with k&n intake and cut off the old muffler and slapped on two magnaflows. Me and a buddy just did knock sensors since it decided to throw a code yesterday and also did plugs and wires, manifold gaskets and throttle body gasket. so stay tuned for some graphs later
|
oh and we also hooked up the nelson efan harness so ill get that on their as well after the tune
|
well? lol
|
Still at the dyno i had to run a few errands but about to go see how she's doing.
|
Nice, well I should be posting up my results later with mine and the new mods. it will be good to see how far its come from stock
|
How bout now?
|
1 Attachment(s)
Attachment 116421
Stock tune and the modified one. Not too bad I suppose |
286 hp 312 torque stock lq4 4l80e 14 bolt 9.5
306 hp 331 torque on 89 octane |
That's some damn good numbers for basically stock :cheers:
It's time to see what you can get from some mods now :D |
Thanks! I was actually very impressed cause I thought it would put out in the 270 range. Next on my list is longtubes ypipe and borla xr1 so we will see how it works out. Took out for a test drive and the grin on my face was awesome. Shifts at 6k rpms means 90 mph 2nd gear pulls lol
|
1 Attachment(s)
Attachment 116411 efans are now done too!
|
2 Attachment(s)
|
Very cool. .. I'm a lil pissed ...lol
I hope my tires are steeling my power on the dyno. |
Originally Posted by 383vert
(Post 5110317)
Very cool. .. I'm a lil pissed ...lol
I hope my tires are steeling my power on the dyno. |
year and a half later..... instead of making another thread ill just post on this one, truck right now since that dyno graph has 1 3/4 american racing headers, catless connection pipes into a single 3 inch pipe into a borla xr1, efans, underdrive crank and overdrive alternator pulleys. Going to be doing a cam swap next month, parts going in: brian tooley stage 3 truck cam ( 218/224 .551/.551 133+3), pushrods, dual springs, ported ls6 oil pump, katech chain, 8.1l marine injectors (still looking for these so if you got some let me know!), tr55 plugs, 3200 single disk. Ill post the the numbers once i get it tuned just curious as to what numbers yall think i should expect.
|
1 Attachment(s)
|
Originally Posted by asap216
(Post 5265055)
year and a half later..... instead of making another thread ill just post on this one, truck right now since that dyno graph has 1 3/4 american racing headers, catless connection pipes into a single 3 inch pipe into a borla xr1, efans, underdrive crank and overdrive alternator pulleys. Going to be doing a cam swap next month, parts going in: brian tooley stage 3 truck cam ( 218/224 .551/.551 133+3), pushrods, dual springs, ported ls6 oil pump, katech chain, 8.1l marine injectors (still looking for these so if you got some let me know!), tr55 plugs, 3200 single disk. Ill post the the numbers once i get it tuned just curious as to what numbers yall think i should expect.
|
Originally Posted by Fast355
(Post 5267136)
Is that cam 113+3? Also is that Speedtek in Haltom city?
|
Any update?
|
forgot about this thread... but yes two weekends ago i did the cam and head swap, pulled the trans and did the shift kit and installed converter. All i lack to do now is installed the driveline, pushrods and engine harness goes back on. so i should be starting it tomorrow
|
Good deal
|
All times are GMT -5. The time now is 08:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands