super simple setup, and very effective apparently I'm McLovin it

 

It has a TRICK log manifold but he's redone the crossover, downpipe, and coldside himself.

Rear end and suspension...Think extremely simple lol

 

I originally had done a trick stage 3 kit. I quickly realized it was not going to make anywhere near the power I was interested in so I ditched everything but the log manifold. I added a tial mvr44 to the manifold just under the turbo (the way it should have been done), then I patched over the original waste gate hole (after the trick installed gate fell the **** off). I built my own 4 inch downpipe and exhaust with diesel dynomax muffler.

Rear end is the original rear end with a mini spool and stock axles. Suspension is completely stock 120000 miles shocks and all. The front springs have been heated with a torch to achieve ride height desired. Rear springs are removed all except one leaf and overload spring. Cal tracs and a 9 degree shim. Half inch preload and -4 degrees pinion angle.

 

As said above, simple and effective. Very impressive

 

Thanks. Makes me wonder what this thing could do in a racecar with a glide and water intercooler

 

We're about to find out...
Well with a 76mm at 3320lbs with a Th400, and air to air, on a 275 tire anyway...

 

Dam very nice setup! Simple yet extremely DEADLY!

 

Pics or vids???

 

Mother of god.....that is going to be awesome

 

Yes it is.. You need to start a thread on that beast. Looks amazing