First Dyno
#18
I believe the 72cc dish in the AFRs is what's keeping it under 400 right now. I went with them on purpose with the intent of going FI in the future. It was a current sacrifice for future gain. Went for a good ride this morning on the way in all the same - wheels broke loose hard @ 50mph when I passed a slow mover...nearly snaked underneath the damn thing before I let up.
Pulled out the sheet again to double check - was 383 / 402...
Pulled out the sheet again to double check - was 383 / 402...
Last edited by darkirish63; 01-21-2016 at 07:14 AM.
#20
I have a gauge for that
iTrader: (42)
The rpm axis is cutoff in the first pic, but just looking at the curve I would guess torque peaks around 3400rpm than just falls fast after that which is why the power is low. Good setup for towing or seat of the pants feel, but not so good for high horsepower. If you could move the torque pand to peak around 4000 you will make another 50hp. Torque falling like that could mean restrictive exhaust, intake, or valve spring issues, or just a function of the cam in there.