6.0L tvs1900 #s
 

Just got back from the dyno, truck made 565rwhp on the first pull cant remember tq and rpms. Twick the tune a bit and on the second pull it made 583 rwhp@6200rpms and 556rwtq@4200 rpms. This is on a mustang dyno and sorry about the psi we had posted but we hadnt actually paid much attention to the gauge but it was making 11-12psi on the dyno. Will post up vid later tonight so you can hear the b!tch scream:devil:

http://www.youtube.com/watch?v=1FL4rNEx1Fw

wow those are awesome numbers. almost exactly 200hp 200tq more then my n/a 6.0

that a stock 6.0 with a tvs? reason i ask is cause i am gonna be getting a tvs2300 sometime at the end of summer!!

it is a cam only 2008 v max motor with stock l92 heads

vid added

ehh those blowers are over rated.

You guy's finaly have something to be cocky about:D Those TVS blowers are making killer numbers, and I think they will show the power at the track with the low IAT's. I wouldn't be suprised if the combo above runs 10's.

thats what we are trying to do and working our azz off on doing it

I think thats enough power, If it hooks up and have decent weather you should be there. I don't know how a mustang, and dyno dynamics compare but I have herd they are both conservative. My 5000LB 4x4 runs high 10's with 580RWHP uncorrected. You guys being close to sealevel should run close to your corrected numbers. A uncorrect 550 should get a 2wd into the 10's.

yes the problem is the 60-foots truck peels out u can tell in the video i know the truck is capable of a 10 second pass but everything needs to be perfect to run it and this guy drives his truck daily the corrected numbers were somewere in the 750 rwhp and the 650rwt but the mustang dynos put a load on the vehicle and suppostly give u less hp that the rest of the dynos i dont know if it is true or not