2003 4l60e- Pulled out of my 2003 rcsb sierra. Had 160xxx miles upon removal. Never missed a beat and shifted very well considering the miles. Includes: stock converter, dipstick, yoke. Prefer picked up, but will consider shipping if you want to pay for the ride. 400 firm


Belltech 2" lowering keys- pulled from my old 2001 tahoe. Should fit any 99-06 4wd 35 + shipping SOLD

Flowmaster single chamber muffler- used in good condition, no rust. 2.5" in/out. 25 + shipping

24.5lb injectors- came out of my 2003 5.3, pulled right off the rail and put into a bag. 40 + shipping

Also parting out truck in the picture below. Most interior pieces and odds and ends are available. Tan colored interior. All the powertrain and brakes are sold. Let me know if anyone needs anything.


GAUGING INTERESTS
Considering raising my truck back to stock height and building a turbo kit. I will post these items to see if there is any interest in my items once the work begins. These item are CURRENTLY ON MY TRUCK. Dont be afraid to put in an offer on these items.

DJM 3/6 Drop kit- 3" lower a arms balljoints have ~10k miles, flip kit minus the notch, 4" shorter monroe shocks. All that is needed is a notch. Here is the stance it had with 3/4 of a coil cut from the factory springs and the rear leafs clamped. $425 + shipping


31lb injectors-regular 8.1 injectors. maybe 1000 miles on them. $90 + shipping

Calspeed lts + ory- Have maybe 8000 miles on them. The y pipe could be sold with or without the headers. Y pipe has been modified to fit a 4l80 with a bfh. Would still work on a 4l60. Also includes 4 band clamps. $275 + shipping
PROSPECTING BUYERS
1. durty
2.nitrouspowrdss

TRADES

Will do trading on turbo, fuel system, hotside, coldside, intercooler parts. Straight trade or cash either way. Just let me know what you got via pm.

 

Pm sent

 

Pmed ya

 

Headers still available?

 

get in line lol

 

SALE PENDING ON DROP KEYS

All pm's replied to. The headers are still on the truck, hence why I put it under gauging interests. They will probably be pulled withing 1 to 2 months. Also I forgot to mention, the headers have an extra bung welded into them for a wideband if that matters to anyone.

Just trying to get on common ground with everyone about the gauging interest items.

 

Will you do 90$ shipped on injectors

 

Yes I will. I can put you as the top interested buyer for them if you are interested.

 

these are a lil bigger than the stock 5.3 injectors right?

 

Your crazy as a **** house rat if you raise that truck back up lol. Looks damn good. Now back to our regularly scheduled programming.