Ferocity02

iTrader: (59)

Selling a brand new On3 76mm turbocharger because I am going a different route. Only mods I have made to the unit are a tapped 1/8 NPT hole in the compressor housing and I coated the turbine housing with VHT flame proof paint, oven cured. Will come as pictured, I'll also include a T4 flange gasket. Please PM me.

$300 shipped SOLD

Cold Side:
0.80 AR
4” inlet and 2.5” outlet
Inducer-76.71mm
Exducer-102.36mm

Hot Side:
T-4 Flange
0.96 AR Exhaust Housing
3.0" V-band outlet
Inducer-74.5mm
Exducer-65mm

patofdzb

iTrader: (5)

bump for a good turbo! been running one for over 8 months and not a single issue!