Twin Turbo Build....
05-30-2009, 06:12 PM
#1
On The Tree
Thread Starter
iTrader: (5)
Join Date: Jan 2005
Location: Bandera, TX
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Twin Turbo Build....
Well, you all know the progression of boost....lol... I started with the sts, then went to front mount, and went through several turbo upgrades... and Now.. Twins....
Nelson Performance is doing the build. We are going to start out with Flipped manifolds, and twin MP76s. going to start out and see what it does on the 6.0 for now. But a 408 or maybe even LSX 427 will be built soon. Here are some teaser pics, not near finished but will be in a week or so. The full build will be here.... http://www.ls1truck.com/forums/power...o-project.html
let me know what yall think.
Nelson Performance is doing the build. We are going to start out with Flipped manifolds, and twin MP76s. going to start out and see what it does on the 6.0 for now. But a 408 or maybe even LSX 427 will be built soon. Here are some teaser pics, not near finished but will be in a week or so. The full build will be here.... http://www.ls1truck.com/forums/power...o-project.html
let me know what yall think.
05-30-2009, 06:44 PM
#3
On The Tree
Thread Starter
iTrader: (5)
Join Date: Jan 2005
Location: Bandera, TX
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
ya, 11.27@124 with a 1.87 60' on 15 psi. that earned me the track warning. had alot left to mess with. but figured id try twins, i still have my single kit. im going to get the cage in before i go back. but this is my street cruiser. not a track truck at all.
Last edited by bansheerider44; 05-30-2009 at 07:24 PM.
06-05-2009, 08:08 AM
#6
On The Tree
Thread Starter
iTrader: (5)
Join Date: Jan 2005
Location: Bandera, TX
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
some updated pics, i/c should be in today.....
http://www.ls1truck.com/newstorage/t...o/mic/stageII/
http://www.ls1truck.com/newstorage/t...o/mic/stageII/
Trending Topics
06-05-2009, 08:08 PM
#8
That looks so simple and clean that I'm surprised no-one has done it before.......or maybe they have and I missed it. Lots of room between motor and radiator with E fans. You can probably buy another turbo for what most of the custom manifolds and crossover pipes cost that mount the single turbo and tie the two sides together.
