Parting out the turbo kit...lots of parts for sale!
Apr 6, 2009 | 06:06 PM
#1
Thread Starter
High on diesel fumes
iTrader: (70)
Joined: Mar 2005
Posts: 12,658
Likes: 3
From: Phoenix, AZ
Parting out the turbo kit...lots of parts for sale!
Note - shipping is not included in prices below.
kbracing hot parts kit. T4 flange on the log manifold, 2.5" crossover, includes stock driver's side manifold. $900 without 3.5" downpipe, $1400 with. **sold**
3.5" downpipe only, 4" v-band flange on the top end, connects to factory style cat-back underneath, includes cutout (but no blockoff plate). $500 **sold**
Garrett GT4202R dual ball bearing water cooled turbo. Includes compressor outlet v-band fitting, both water fittings, and oil feed and drain flanges. Used for approx 1 year / maybe 8000 miles. Specs here. $1950
Turbo blanket for GT4202 size turbos. Has held up fantastically for the year that I've had it. Bought it on ebay from a guy in New Zealand. Shows no signs of burning through like the popular ones seem to do. $100
Large k&N conical filter with 5" opening. $40
Ebay intercooler. Will measure and get specs as soon as I pull it off the truck $75 **sold**
Synapse Synchronic blowoff valve. $150
Synapse Synchronic 50mm wastegate $275 **sold**
Hallman Pro RX manual boost controller $40 **sold**
Standalone IAT sensor $20 **sold**
Oil pan with -10 female o-ring fitting and oil drain line $60 + your unmolested pan for trade **sale pending**
-4 oil feed line with fitting for side of engine above oil filter $40 **sale pending**
Autometer Z-series pyrometer with EGT probe $70
OR - buy the entire cold side piping and intercooler for $200 **sold**
Most parts can be seen in the following pics. If you need a pic of anything specifically please let me know.
kbracing hot parts kit. T4 flange on the log manifold, 2.5" crossover, includes stock driver's side manifold. $900 without 3.5" downpipe, $1400 with. **sold**
3.5" downpipe only, 4" v-band flange on the top end, connects to factory style cat-back underneath, includes cutout (but no blockoff plate). $500 **sold**
Garrett GT4202R dual ball bearing water cooled turbo. Includes compressor outlet v-band fitting, both water fittings, and oil feed and drain flanges. Used for approx 1 year / maybe 8000 miles. Specs here. $1950
Turbo blanket for GT4202 size turbos. Has held up fantastically for the year that I've had it. Bought it on ebay from a guy in New Zealand. Shows no signs of burning through like the popular ones seem to do. $100
Large k&N conical filter with 5" opening. $40
Ebay intercooler. Will measure and get specs as soon as I pull it off the truck $75 **sold**
Synapse Synchronic blowoff valve. $150
Synapse Synchronic 50mm wastegate $275 **sold**
Hallman Pro RX manual boost controller $40 **sold**
Standalone IAT sensor $20 **sold**
Oil pan with -10 female o-ring fitting and oil drain line $60 + your unmolested pan for trade **sale pending**
-4 oil feed line with fitting for side of engine above oil filter $40 **sale pending**
Autometer Z-series pyrometer with EGT probe $70
OR - buy the entire cold side piping and intercooler for $200 **sold**
Most parts can be seen in the following pics. If you need a pic of anything specifically please let me know.
Last edited by thunder550; Apr 8, 2009 at 03:00 PM.
hmmm...
Apr 7, 2009 | 05:08 AM
#6
I have a pan to exchange...I can ship it to you then you ship me back your oil pan...I will include the shipping label for the return trip...also interested in the oil supply line as well...
Last edited by JakeBrakeIH; Apr 7, 2009 at 05:29 AM.
