turbo guys inside

[05crew]

i need to know what muffler you guy are runing with you turbo setup. i have 2.5in coming off a set of longtubes. i will be taking off the longtubes need week.

i was going to come off the 3in downpipe with a 3in pipe all the way back going in a 3in magnaflow out the back with a 3 or 4in tip to one side. will this work or what are yall running?

[hellbents10]

Magnaflow works great, any thing that is straight through will work good for you. Stay away from Flomasters and the like and you will do just fine.

[Phantom]

I just asked the same ? last week. People had some pretty good suggestions if you wanna look for the thread

[05crew]

i dont see the thread dan...... i see the one about the manafold but no muffler.

[silver-mod-o]

Ive got a 3in DP, into a 3" cutout, a long resonator, and a small IMCO muffler dumped at about the wheel well... Its all 3" all the way back. the 347 will be getting a 4" Duramax exhaust system

[ZO6Ted]

I heard that spin tech is a good one.

[silver-mod-o]

Spintech mufflers sound great but they are chambered.... I know its only a single digit Hp difference... but....

[charcold-bowtie]

I would go with four inch from the start. Its almost a striaght shot, at least on a EC. I have the magnaflow flo thru diesel muffler. 4 inch.

[kbracing96]

Originally Posted by ZO6Ted

I heard that spin tech is a good one.

I took a 3" spin tech and cut the ends off of it and welded 4 ends on it and put it at the end of my 4" diesel exhaust that the only other muffler on the system was a 30" long 4" strait though magnaflow Diesel muffler, and lost 1.5 pounds of boost and about 40-50 hp cuz if the difference in back pressure it added. It quieted down the noise I had on the highway above 70 MPH, but hurt my top end and boost a LOT. I take it off at the track.

[05crew]

so the magnaflow 3in would be bad for me? i was going to run 3in all the way back! i really wanted to run that magnaflow