GONEB4U

iTrader: (125)

LS1 block freshly honed to 3.905 and lightly decked. It was hot tanked and fully cleaned and it also comes with new cam bearings installed. All work was performed by Kehl Tech Performance in CT. They do work for Eastside Performance.
$700 plus shipping

98-2002 VFN WS6 4inch Ram Air Bolt on hood, Comes with Factory Grill inserts.

I have a VFN 98-2002 WS6 4inch Ram Air Bolt on hood, Comes with Factory Grill inserts. New it cost $600 plus shipping. It is already painted Black. It is used but in great shape. I'm asking for $500 obo. **** PICK UP ONLY. ****
I'm located near Danbury CT. Here is a link to my other post.

https://ls1tech.com/forums/showthread.php?t=861661

Here is a link with pics from the original for sale ad for this car.

https://ls1tech.com/forums/showthread.php?t=751652

LS1 Stock Crank Standard. Never cut. Low miles. Fresh and ready to be dropped in. I have 2 of these.
$90 plus shipping

Stock LS1 rods. Clean and ready to go.
$70 shipped

Stock LS1 rods with ARP rod bolts. Used for less than 2k miles.
$110 shipped

LS2 rods and pistons. Less than 1k miles.
$150 shipped

Diamond Forged Pistons part #11500 3.905 bore. Flat top with -2cc valve reliefs with a .945" floating wrist pin (fits stock rods and stock stroke motors.) Pistons have been used for 2000 street driven miles. Never been sprayed, boosted, or raced on. No interference with valves.
$310 shipped

ARP Main Stud Kit msk 234-5608 NEW
$160 shipped SOLD TO crzhrs

Clevite Main and Rod bearings for standard cranks. NEW MS-2199p & CB-663p
$95 shipped for both SOLD TO IGNANt

Manley Piston Rings 3.905 bore size. Part # 46107 NEW
$95 shipped

Blueprinted Oil Pump. I bought these from a sponser on here. He told me that they were each on a dyno motor for very low hours. I have 2 pcs.
$100 shipped for each 1 PUMP SOLD TO FRANKSS 1 LEFT.

Rev 1.6 Exhaust Valves for LS1 8 pcs NEW
$55 shipped

Ferrea 1.6 Exhaust Valves for LS1 8 pcs NEW
$75 shipped

SDPC single timing chain for LS1. Part #sd 7140 NEW
$55 shipped

Cometic PHUZION head gaskets for extreme Nitrous or High Boost on a 5.7 LS. New. These are about $200 a piece from a retailer.
$250 shipped SOLD TO LAWNBOY


Double Roller Timing Chain. This was just bolted on a motor that was on a stand but was never used.
$70 shipped SOLD TO FRANKSS

Cometic Head Gaskets for a 4.030 bore by .060 thick. New but it was placed on a motor that was on a stand but never used.
$140 shipped

Summit LS1 H/D Starter. Part # sum-820320. This was bolted on a motor on the engine stand but never used.
$140 shipped SOLD TO RAMPANT

Fidanza LS1 Aluminum Flywheel. Part # 198571 NEW
$325 Shipped

PRO 5.0 Shifter for a F-Body. I used this in my 99 T/A for 1100 miles and less than a year.
$130 shipped SOLD TO Dave 96TA

QA1 F-Body Front Struts. New. Single adj. F-Series
$330 shipped SOLD

MSD Part # 6010. This is to run a carb on a LS motor. NEW
$280 shipped SOLD TO RAMPANT

Harlan Window switch. Brand New.
$50 shipped.

LS1 Front Timing Cover.
$55 shipped

LS1 Valley Cover. I have two of these.
$65 shipped

6.0 Truck oil pan with pickup tube.
$75 shipped

Street and Performance Custom Oil Pan to fit a LS into a 1969 Camaro. I paid over $550 for this pan. It is New and was only bolted on a motor that was on a engine stand. Comes with pickup tube. This is for a New F-Body Pan and pickup tube that was modified by Street and Performance.
$390 shipped

Pushrods. Hardened 7.350x .080. Brand New. I bought these from Roush Racing.
$95 shipped

ALL PRICES ARE obo. NO DIBS. FIRST TO SEND THE $$$ GETS THE PARTS. I ACCEPT PAYPAL. Shipping is for the USA. Other Countries are Extra.

Check my feedback on here and ebay under the same user name and you will see all POSITIVE TRANSACTIONS.

PICS:

BLOCK

http://i264.photobucket.com/albums/i...DSC04993-1.jpg
http://i264.photobucket.com/albums/i...DSC04984-1.jpg
http://i264.photobucket.com/albums/i...DSC04985-1.jpg
http://i264.photobucket.com/albums/i...DSC04983-1.jpg
http://i264.photobucket.com/albums/i...DSC04986-1.jpg
http://i264.photobucket.com/albums/i...DSC04987-1.jpg
http://i264.photobucket.com/albums/i...DSC04988-1.jpg
http://i264.photobucket.com/albums/i...DSC04990-1.jpg
http://i264.photobucket.com/albums/i...DSC04991-1.jpg
http://i264.photobucket.com/albums/i...DSC04992-1.jpg

CRANKS

http://i264.photobucket.com/albums/i...DSC04959-1.jpg
http://i264.photobucket.com/albums/i...DSC04960-1.jpg
http://i264.photobucket.com/albums/i...DSC04961-1.jpg
http://i264.photobucket.com/albums/i...DSC04962-1.jpg
http://i264.photobucket.com/albums/i...U/DSC04964.jpg

RODS STOCK

http://i264.photobucket.com/albums/i...U/DSC04965.jpg
http://i264.photobucket.com/albums/i...U/DSC04966.jpg

RODS STOCK ARP ROD BOLTS 8740

http://i264.photobucket.com/albums/i...U/DSC04972.jpg

LS2 RODS AND PISTONS

http://i264.photobucket.com/albums/i...U/DSC04998.jpg
http://i264.photobucket.com/albums/i...U/DSC04999.jpg
http://i264.photobucket.com/albums/i...U/DSC05000.jpg
http://i264.photobucket.com/albums/i...U/DSC05001.jpg

DIAMOND FORGED 3.905 PISTONS

http://i264.photobucket.com/albums/i...U/DSC04957.jpg
http://i264.photobucket.com/albums/i...U/DSC04956.jpg
http://i264.photobucket.com/albums/i...U/DSC04955.jpg
http://i264.photobucket.com/albums/i...U/DSC04954.jpg
http://i264.photobucket.com/albums/i...U/DSC04953.jpg

ARP MAIN STUD KIT

http://i264.photobucket.com/albums/i...U/DSC04967.jpg

CLEVITE MAIN AND ROD BEARINGS STANDARD SIZE

http://i264.photobucket.com/albums/i...U/DSC04968.jpg

MANLEY PISTON RINGS 3.905

http://i264.photobucket.com/albums/i...U/DSC04969.jpg

BLUEPRINTED OIL PUMP

http://i264.photobucket.com/albums/i...U/DSC04970.jpg

REV EXHAUST VALVE 1.6

http://i264.photobucket.com/albums/i...U/DSC04971.jpg

SDPC TIMING CHAIN N-MOTION SINGLE

http://i264.photobucket.com/albums/i...U/DSC04973.jpg
http://i264.photobucket.com/albums/i...U/DSC04974.jpg


COMETIC PHUZION HEAD GASKETS

http://i264.photobucket.com/albums/i...U/DSC04976.jpg
http://i264.photobucket.com/albums/i...U/DSC04978.jpg
http://i264.photobucket.com/albums/i...U/DSC04979.jpg
http://i264.photobucket.com/albums/i...U/DSC04980.jpg


DOUBLE ROLLER TIMING SET

http://i264.photobucket.com/albums/i...U/DSC04995.jpg
http://i264.photobucket.com/albums/i...U/DSC04996.jpg
http://i264.photobucket.com/albums/i...U/DSC04997.jpg

COMETIC 4.030X .060 MLS HEAD GASKETS

http://i264.photobucket.com/albums/i...U/DSC05002.jpg

SUMMIT H/D LS1 STARTER

http://i264.photobucket.com/albums/i...U/DSC05008.jpg
http://i264.photobucket.com/albums/i...U/DSC05009.jpg
http://i264.photobucket.com/albums/i...U/DSC05010.jpg

FIDANZA ALUMINUM FLYWHEEL LS1

http://i264.photobucket.com/albums/i...U/DSC05011.jpg
http://i264.photobucket.com/albums/i...U/DSC05012.jpg
http://i264.photobucket.com/albums/i...U/DSC05013.jpg
http://i264.photobucket.com/albums/i...U/DSC05014.jpg

PRO 5.0 SHIFTER

http://i264.photobucket.com/albums/i...U/DSC05015.jpg
http://i264.photobucket.com/albums/i...U/DSC05016.jpg
http://i264.photobucket.com/albums/i...U/DSC05017.jpg

QA1'S F-BODY STRUTS

http://i264.photobucket.com/albums/i...U/DSC05019.jpg
http://i264.photobucket.com/albums/i...U/DSC05020.jpg
http://i264.photobucket.com/albums/i...U/DSC05022.jpg

MSD 6010

http://i264.photobucket.com/albums/i...U/DSC05024.jpg
http://i264.photobucket.com/albums/i...U/DSC05025.jpg
http://i264.photobucket.com/albums/i...U/DSC05026.jpg

HARLAN WINDOW SWITCH

http://i264.photobucket.com/albums/i...U/DSC05027.jpg

Klive

iTrader: (4)

interested in the cometic 4.030" gaskets, also, what bore are the diamond pistons?

GONEB4U

iTrader: (125)

Sale is pending on the pistons. But the head gaskets are dtill available.