F/S: 3.75" elec cutout
Nov 29, 2007 | 07:51 PM
#1
Thread Starter
Joined: Apr 2007
Posts: 1,278
Likes: 0
From: Douglasville, GA
F/S: 3.75" elec cutout
I am taking my electric cutout made by http://www.badlanzhpe.com off and am going to sell it and just put a block off plate on it. I have only had it on for maybe 2 months. no problems!
I will take $90 shipped (UPDATED). for the valve ONLY. (You need to purchase the cutout.)
The valve is 3.75" but the cutout it goes along with is special made by this company to fit on 3" pipe.
so the cutout fits 3" pipe, but it is enlarged on the end where the valve attaches to 3.75" so there is no exhaust restriction like on the QTP and most other cutouts.
this is a picture of the cutout I have but this is a new one. Mine will come with all of this.
Here is a picture of the cutout you will need to buy to run my valve on. They go for $35 brand new. You can see where the pipe gets bigger to fit the larger valve.
I will take $90 shipped (UPDATED). for the valve ONLY. (You need to purchase the cutout.)
The valve is 3.75" but the cutout it goes along with is special made by this company to fit on 3" pipe.
so the cutout fits 3" pipe, but it is enlarged on the end where the valve attaches to 3.75" so there is no exhaust restriction like on the QTP and most other cutouts.
this is a picture of the cutout I have but this is a new one. Mine will come with all of this.
Here is a picture of the cutout you will need to buy to run my valve on. They go for $35 brand new. You can see where the pipe gets bigger to fit the larger valve.
Last edited by joshua022; Dec 5, 2007 at 10:03 AM.
Dec 6, 2007 | 06:19 AM
#4
Thread Starter
Joined: Apr 2007
Posts: 1,278
Likes: 0
From: Douglasville, GA
Thread
Thread Starter
Forum
Replies
Last Post
GXPJAY
Trucks and SUV Classifieds
5
Feb 13, 2022 08:15 AM
GXPJAY
GM Parts Classifieds
7
Jan 27, 2016 11:45 AM