Project update.

1logote · 11-04-2009, 09:32 PM

Finally got the 4l60e back together with the new parts installed:

Transgo Hd-2
PATC Superior Fairbanks Super Billet 4th servo with new billet cap.
TCI Billet 2nd servo.
Transgo Hardened Separator Plate
Sonnax Billet Forward Accumulator Piston
TCI locking Dipstick and tube
New Seals all around

Now wondering how I can get the Stall cleaned out before I install it. Ha. Ready to get it in the truck.

NoShow · 11-06-2009, 12:00 AM

If you don't mind, what was the price of all those parts, roughly? And how long did it take you?

Ready to go beat the crap out of it??

1logote · 11-06-2009, 11:17 PM

Nah Im going to be real real gentle with it. Its my driver hopefully.

Transgo Hd-2= around 75 summit
PATC Superior Fairbanks Super Billet 4th servo with new billet cap. around 75 Patc
TCI Billet 2nd servo. almost 90 Summit
Transgo Hardened Separator Plate around 20 Patc
Sonnax Billet Forward Accumulator Piston 10 Patc
New Seals all around 14 oreilly
TCI Dipstick- 23 summit

The install on all of it was around 8 hours or so with it on a table and done very tediously. Ha

1logote · 11-12-2009, 11:56 PM

I did some calculating and I think I could have had a brand new built tranny for just a little more than I ended up spending on this one. Pretty sad how easy it was to spread it out over time and it not seem that way. Damn. lol

1logote · 11-14-2009, 09:37 PM

Got the truck going today. Transmission in along with a lot of other work done. Got a lot left to do till its ready for the road but now it is running and put back together. Shifts good on the lift. Glad

NoShow · 11-18-2009, 10:16 PM

Hope it works out well. I know how tranny work can be a nail-biter when you're not sure if you got a piece of dust in the valve body or whatnot.

Putting mine to bed for winter but the tranny is the first thing on the list for March