Here are some pictures of the tensioner on the inlet forward design.

 

Ordered my tensioner! Thanks David for the help this morning and also in expediting my order for the molded reservoir-hose!

- Mike

 

so is this just for the tensioner, or for the bracket as well?

 

Just the tensioner and necessary hardware. The bracket is the one that the kit originally came with.

 

alright. im still having problems with my belt alignment situation, and i dont know why. im thinking ill round up all new accessory stuff. (tensioner, radix bracket, accy bracket, crank bolt, etc)...

is it possible the snout could bend on the supercharger?

 

Negative.

If you have the time, take a trip out here. I would like to see it.

 

thats what i figured. im trying to plan a trip the first weeknd in may.

 

I also had alignment issues. Went through several belts. I got it resolved by going with 2 100mm Metco idler pulleys. And for the tensioner pulley I used a thin washer behind the pulley to move it foward.

 

any help then? which pulley did you put the washer behind?

https://www.performancetrucks.net/fo...d.php?t=408553

btw, i have put the metco pulleys on as well. didnt seem to make a bit of bit of difference.

 

I placed the thin washer behind the tensioner pulley. Something else. Instead of using the Magnacharger supplied tensioner - I used a Gates Pulley I purchased from NAPA part # 38131. It worked for me .