NNBS 07 RCSB - Project Pushing the Envelope!
03-30-2014, 03:38 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (5)
Join Date: Jan 2006
Location: Ottawa Canada
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
NNBS 07 RCSB - Project Pushing the Envelope!
Sold my 04 GTO project about a year and a half ago,bought an 06 Z06,and love it!
But i've been wanting to do a LS turbo project bad!I've even been gathering some turbo parts.
So i've been looking for a solid beater 99+ RCSB 2WD for a number of months,and this is what i've come up with...07 4.8,G80 3.23,PL 115k miles,rougher in real life than in the pics,this was used as a truck LOL.($5300)
PLAN: Drop it 4/7",good cam/springs,Single MasterPower T76 (undecided on Hot/Cold side at this point)and supporting mods and some Bogarts
GOAL:Just looking to have a pile of fun pushing the limits of the 4.8 longblock and 4L65E,since it's not going to be a DD gonna crank the boost on race fuel.We do have a local 1/2 mile event that i may aim for.
I do have an LS6 block/crank,LS3 rods and Diamond pistons in the garage for back-up.
Budget:keep it to a min. so the old lady doesn't catch on!
So no real rush,but going to try to keep progress steady-I'll post pics as i go
Dom
But i've been wanting to do a LS turbo project bad!I've even been gathering some turbo parts.
So i've been looking for a solid beater 99+ RCSB 2WD for a number of months,and this is what i've come up with...07 4.8,G80 3.23,PL 115k miles,rougher in real life than in the pics,this was used as a truck LOL.($5300)
PLAN: Drop it 4/7",good cam/springs,Single MasterPower T76 (undecided on Hot/Cold side at this point)and supporting mods and some Bogarts
GOAL:Just looking to have a pile of fun pushing the limits of the 4.8 longblock and 4L65E,since it's not going to be a DD gonna crank the boost on race fuel.We do have a local 1/2 mile event that i may aim for.
I do have an LS6 block/crank,LS3 rods and Diamond pistons in the garage for back-up.
Budget:keep it to a min. so the old lady doesn't catch on!
So no real rush,but going to try to keep progress steady-I'll post pics as i go
Dom
Last edited by chopperloco; 06-01-2014 at 09:56 AM.
04-15-2014, 09:36 PM
#5
TECH Enthusiast
Thread Starter
iTrader: (5)
Join Date: Jan 2006
Location: Ottawa Canada
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
...only made a bit of progress thus far:
Got a black W/T grill and bumper installed
Removed all badging and wheel lip trim
Bought Belltech front struts and spindles
Ordered a Static flip kit
Ordered rear 15x11.5 Bogart D10's,gonna figure out the fronts once suspension is installed...
Bought a Procharger 3 core intercooler
I have decided on the Trick Stage 4 Hotside and am waiting to talk to Rick and place the order*EDIT-Ordered!!!
Also picked up some GT500 injectors to get me by for now.
Stuff i had before i got the project:
MP T76 Q trim 1.00 A/R
DEI blanket
Autometer Boost gauge
NGK wideband
Turbosmart in-cab manual boost controller
Dom
Got a black W/T grill and bumper installed
Removed all badging and wheel lip trim
Bought Belltech front struts and spindles
Ordered a Static flip kit
Ordered rear 15x11.5 Bogart D10's,gonna figure out the fronts once suspension is installed...
Bought a Procharger 3 core intercooler
I have decided on the Trick Stage 4 Hotside and am waiting to talk to Rick and place the order*EDIT-Ordered!!!
Also picked up some GT500 injectors to get me by for now.
Stuff i had before i got the project:
MP T76 Q trim 1.00 A/R
DEI blanket
Autometer Boost gauge
NGK wideband
Turbosmart in-cab manual boost controller
Dom
Last edited by chopperloco; 04-19-2014 at 09:10 AM.
Trending Topics
04-16-2014, 09:34 PM
#8
TECH Enthusiast
Thread Starter
iTrader: (5)
Join Date: Jan 2006
Location: Ottawa Canada
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
05-16-2014, 04:01 PM
#9
TECH Enthusiast
Thread Starter
iTrader: (5)
Join Date: Jan 2006
Location: Ottawa Canada
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
....slowly...
...waiting on the hot side and the flip kit...
Got the rear Bogarts from Rich 15x11.5" 7.5" offset
Mounted a 315/60 Hoosier Drag Radial to try,looks like it will work,but eventually would like to go to the 295/65 Mickey DR
Got the rear Bogarts from Rich 15x11.5" 7.5" offset
Mounted a 315/60 Hoosier Drag Radial to try,looks like it will work,but eventually would like to go to the 295/65 Mickey DR
