1999 2 Dr Tahoe Sport LS2 6.0
#1
Teching In
Thread Starter
Join Date: Feb 2016
Location: Alabama
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
1999 2 Dr Tahoe Sport LS2 6.0
I started this project about the time I joined the forum a year ago. It finally is on the highway.
I started with a 1999 Tahoe 2 Dr Sport 4WD that had a shot 5.7 Votec 4L60E. I installed a 2006 LS2 6.0L from a Corvette that had a Manual Tranny. I kept the 4L60E.
It was quite an undertaking. My first one of these. Learned a lot along the way. If I do one again it will be so much easier.
Wiring Harness and Computers came from Current Performance. The Original computer wasn't used for anything after the swap. It may be needed (More on that in a question in the forum).
ECM/TCM are new but originally for a trailblazer.
Engine Mounts and A/C compressor relocation mount is Dirty Dingo.
Air intake is from Spectre. They were very helpful.
At present, Everything is fully operational and works great with the exception of the 4 wheel drive (question coming in another forum).
I started with a 1999 Tahoe 2 Dr Sport 4WD that had a shot 5.7 Votec 4L60E. I installed a 2006 LS2 6.0L from a Corvette that had a Manual Tranny. I kept the 4L60E.
It was quite an undertaking. My first one of these. Learned a lot along the way. If I do one again it will be so much easier.
Wiring Harness and Computers came from Current Performance. The Original computer wasn't used for anything after the swap. It may be needed (More on that in a question in the forum).
ECM/TCM are new but originally for a trailblazer.
Engine Mounts and A/C compressor relocation mount is Dirty Dingo.
Air intake is from Spectre. They were very helpful.
At present, Everything is fully operational and works great with the exception of the 4 wheel drive (question coming in another forum).