Race Ready Perfromance
11-11-2015, 07:42 AM
#1
FormerVendor
Thread Starter
Join Date: Oct 2015
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Race Ready Perfromance
Just wanted to stop in and say hello..
I am with the company Race Ready Performance and we manufacture exhaust cutouts.. We took the company over about 2 years ago from the previous owner and finally feel like we have settled down and got everything under control. We look forward to being part of the community.
Jacob
I am with the company Race Ready Performance and we manufacture exhaust cutouts.. We took the company over about 2 years ago from the previous owner and finally feel like we have settled down and got everything under control. We look forward to being part of the community.
Jacob
11-11-2015, 01:21 PM
#6
I run one of your 4" cutouts then later a 5", both were great! I have used QTP and DMH ones in the past and yours seem to work the best, and you guys are the only ones that make a 5" I believe. I ordered a new switch at one point and customer service was very good.
11-11-2015, 01:41 PM
#7
FormerVendor
Thread Starter
Join Date: Oct 2015
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for you business Atomic.. And yes I do believe you are correct in that we are the only producers of a 5" cutout.. If you have any pics of your setup i would love to see it.. We hardly ever get install pics of our 4 or 5 inch cutouts.
Trending Topics
11-11-2015, 03:57 PM
#8
Sure, this is on a 4wd silverado regular cab short bed turbo setup with a 5" downpipe.
First installation, obviously very tight in that area with the sewer pipe size exhaust.
I made a dump piece and trimmed the tcase ribs so I could rotate it so the motor is above the bottom.
First installation, obviously very tight in that area with the sewer pipe size exhaust.
I made a dump piece and trimmed the tcase ribs so I could rotate it so the motor is above the bottom.
11-12-2015, 07:31 AM
#10
FormerVendor
Thread Starter
Join Date: Oct 2015
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Atomic that 5" setup is legit.. What size turbo were you running on that truck?
Also, good call on rotating that motor up out of the way..
03Chevytruck we look forward to your order, and yes we do sell 4" Y pipes.
Also, good call on rotating that motor up out of the way..
03Chevytruck we look forward to your order, and yes we do sell 4" Y pipes.
