New member to the forum
#1
New member to the forum
Hello everyone !
I'm new to the forum and the world of truck performance. I'm in San Antonio, Texas.
I'm buying a 99 Silverado SWB with a blown 4.8 and will be swapping in a 6.0.
Can anyone give me some direction or help ?
I'm new to the forum and the world of truck performance. I'm in San Antonio, Texas.
I'm buying a 99 Silverado SWB with a blown 4.8 and will be swapping in a 6.0.
Can anyone give me some direction or help ?
Last edited by sinister-one; 03-02-2017 at 08:23 AM.
#2
TECH Senior Member
iTrader: (2)
Remove motor, install new motor. Pray the transmission will survive the 6.0 and of course tune it for the change. Use the 6.0 injectors, 1999 4.8 injectors are too small for the 6.0 as they are 21lb/hr compared to the 24-25lb/hr on the 6.0's.
Not really much to it.
Not really much to it.
#4
And be sure to get an 01 to 06 with the 24x reluctor so you can use your box and wiring ... and avoid the iron head 99 - 2000 motor as the crankshaft is longer than 01 up and your transmission won't work.