Milling 243 heads
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: May 2014
Location: Mesa, Az
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Milling 243 heads
Im sure this question has been beat to death and i looked an could not find the answer, but, what would be the most you would mill off the heads? would it be safe milling them say .042-.045''?
Thanks
Thanks
#2
The average most milled is 0.03 some people have milled them all the way to 0.05, but this can cause the intake manifold ports to not match up with the head ports. Also milling them more than 0.03 could cause strength/durability issues.
You could mill them 0.03 and throw a 0.03 or 0.04 head gasket on also, but modification to the intake manifold might have to be made in order for them to match up.
You could mill them 0.03 and throw a 0.03 or 0.04 head gasket on also, but modification to the intake manifold might have to be made in order for them to match up.
Thread
Thread Starter
Forum
Replies
Last Post
03regcab sierra
INTERNAL ENGINE MODIFICATIONS
2
09-09-2015 02:02 PM
GrooveCityZ71
GM Engine & Exhaust Performance
7
08-31-2015 12:05 PM
BigEd_72455
GM Parts Classifieds
0
08-08-2015 04:49 PM