Three6GMC

iTrader: (11)

Didn't really find much info on these new 6.2s and running a nitrous system on one. I just did a install on the 2014 Denali and man gotta say the kit I got didn't fit very good and no instructions were sent out with the kit. First off got sent the wrong kit, 5.3 plate Kit but box was labeled 6.2??? The 6.2 intake has some molded in nipple on it that gets in the way, and as far as I can tell the 5.3 intake doesn't have this nipple. After the first kit got sent back got the kit I was supposed to get but the damn plate still hits the nipple on top of the intake. Had to flip it upside to get it to work. Hopefully it doesn't cause any issues. It was hot as hell today so didn't get to finish it but got 90% done.

Quick question... what wire is used on these new DI motors for a tac signal? I fig it was like the LS coils but I read somewhere that they are different now. Got the NX window switch so reason I ask. Its the last thing I need to wire up other then when the stand alone comes in before I can go test it out.

Anyways here are a few pics I took, don't mind the dirty *** engine bay. Truck is a work truck...

The first plate kit I got didn't fit in either orientation.






The second kit, fit but had to flip the plate as it still contacted that nipple on top of the tb flange...

07Softail

Damn Dude.... Give the Engine Bay a Wash down!!!

RT

Three6GMC

iTrader: (11)

I know I know...

My Duramax is cleaner...

Boombastic

There is a fella named Jeff Wybrow from Ontario Canada who has a nice nitrous setup. U might find him on Facebook.

Jonblarc7

Here is his build thread




https://www.performancetrucks.net/fo...ned4x4-532747/