SmokinHot98

iTrader: (20)

what could cause to to get thrown, why TC seems VERY loose to for what its worth.

Threw the code on the way to a wedding, and then the trans was getting pretty hot

budhayes3

iTrader: (19)

I don't have all of the P codes memorized yet lol, what is a P2761?

SmokinHot98

iTrader: (20)

from what i've found

P2761 = Torque Converter Clutch Pressure Control Solenoid Control Circuit/Open

Mrgoodwrench3

Does it feel like the transmission is stuck in 3rd gear? The ignition switch is a common failure for this code.

SmokinHot98

iTrader: (20)

yea, and its sucking the crap outta my gas.... then again its a modded 6.0, lol.

It bugs me that the RPM's sit so high. 65 sits @2300 cruising and tap the gas it jumps to 2700-2800.

The TC seems to be bouncing out of lock-up to. So how would I go about fixing this?

thanks

budhayes3

iTrader: (19)

If the problem is what MrGoodwrench3 mentioned, then replacing the ignition switch will solve your issue

SmokinHot98

iTrader: (20)

ok, I'll try that. Thanks guys, its been one thing after another bt I think this is the last issue.

I put in my tru-cool 40k cooler yesterday and dropped the temps 60-80*, boy was I happy

budhayes3

iTrader: (19)

Very nice, hopefully that will help extend the life of your trans so you have one less thing to worry about

Cook

iTrader: (1)

any update?

SmokinHot98

iTrader: (20)

sorry its been awhile since I've been on here, but not really. The Ignition switch actually crapped out on me totally so i replaced it and the code has stayed there. When it gets warmer out I have to run over all the grounds to make sure they have a good connection, because I have a huge draw in power when running many accessories. Or it could be the battery.... not sure