New Wing!
08-25-2016, 05:38 PM
#1
Staging Lane
Thread Starter
Join Date: Feb 2016
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
New Wing!
Hey guys, So i dont know how many of you go into the "show & shine" section here in the forum. If you havent, then you proably missed my post about a new wing style that ive been working on.
In a nut shell, Ive been trying to come up with a different style for wings and i finaly got something available. I JUST came up with wings for the NBS & NNBS trucks. The only truck i havent officially made one yet for is the stepside but i think i might have it ready soon. These wings will bolt up to the OEM Holes.
If you do not have the Rivnut, i can provide them. The wing is CNC Cut out of 3/16" & 1/2" Aluminum and welded and come in a bare finish. I offer a few options as well. You can get the wing with the top edges straight across or have them taper down as shown in the pic.
I also offer the option of a Custom Engraved Acrylic as a center piece. I can practicly engrave anything within reason on the acrylic and have the engraving filled with any basic color. The acrylic slides on to the wing
via 3 machined slots on the edges and gets glued. Im selling these starting at $400 without the acrylic or $538 with the custom acrylic. Shipping is inlcuded as well as all hardware. These are made as ordred so Lead time is 3-7 days depending if you go with the acrylic.
I know some dont like wings and that's understandable but i would like to provide something new out there. I'm also going to be designing a splitter here soon. It is not going to be sticking out 3ft i promise and Its not just goig to be a lip. Its goind to be a plate that
covers the bottom of the bumper and attaches to the Frame. For more info and pics you can check out my Instagram k_designs_wings.
Dont mind the hot glue lol.. its actually going to get welded.
In a nut shell, Ive been trying to come up with a different style for wings and i finaly got something available. I JUST came up with wings for the NBS & NNBS trucks. The only truck i havent officially made one yet for is the stepside but i think i might have it ready soon. These wings will bolt up to the OEM Holes.
If you do not have the Rivnut, i can provide them. The wing is CNC Cut out of 3/16" & 1/2" Aluminum and welded and come in a bare finish. I offer a few options as well. You can get the wing with the top edges straight across or have them taper down as shown in the pic.
I also offer the option of a Custom Engraved Acrylic as a center piece. I can practicly engrave anything within reason on the acrylic and have the engraving filled with any basic color. The acrylic slides on to the wing
via 3 machined slots on the edges and gets glued. Im selling these starting at $400 without the acrylic or $538 with the custom acrylic. Shipping is inlcuded as well as all hardware. These are made as ordred so Lead time is 3-7 days depending if you go with the acrylic.
I know some dont like wings and that's understandable but i would like to provide something new out there. I'm also going to be designing a splitter here soon. It is not going to be sticking out 3ft i promise and Its not just goig to be a lip. Its goind to be a plate that
covers the bottom of the bumper and attaches to the Frame. For more info and pics you can check out my Instagram k_designs_wings.
Dont mind the hot glue lol.. its actually going to get welded.
08-30-2016, 11:07 AM
#6
Staging Lane
Thread Starter
Join Date: Feb 2016
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
As jtphelps289 mentioned, its more for looks.
Thanks bud, had quite a few design cycles before i made up my mind and i think it came out pretty bad ***. Quite unique and different from whats out there.
Thread
Thread Starter
Forum
Replies
Last Post
Ryan23silverado
GM Engine & Exhaust Performance
3
02-18-2002 02:03 PM