Bluchevypick

iTrader: (65)

Does anyone have a link to where i can order some bolts for the engine mount to frame. I removed a engine from a 2004 yukon denali and all the bolts broke off in the frame. Thanks in advance

Bluchevypick

iTrader: (65)

Anyone?

george88gta

iTrader: (2)

Try ARP or Dormans for them. Otherwise its a hardware store.

Bluchevypick

iTrader: (65)

im looking for the ones going to the frame, not the block. Cant find much info on them.

DrX

iTrader: (7)

Just find some M10-1.5 class 10.9 bolts. Either flange head or plain hex with washers.
bolts

BleuII

11609475 is the part number for them.

2002_Z28_Six_Speed

iTrader: (20)

This is a through hole application. Any metric M10-1.5 bolt will work as stated above. Doesn't matter on exact length. Torque to around 50 lb ft and dont use red loctite like the factory does and it wont happen again.

Stealership bolts will be a waste of money.