40series

why is braided hose better in the long run to replace factory hard lines with a Tru cool set up

nonnieselman

iTrader: (10)

I dont see it being "better" but its easier to work with.
Ive been runnin Aeroquip pushlok for 7 years from the transmission up to the cooler. Its some good stuff.

2007chevy5.3l

iTrader: (21)

I used the rubber hose from the factory lines to the 40k cooler and they have been working fine for 2+ years

AndysC3

iTrader: (14)

I went with braided hose mostly for ease of instalation. I bypassed the radiator, and the braided hose made it work nicely.

40series

what is easier with braided hose to work with.

40series

how does braided hose ease the install of the cooler?

andrew383

iTrader: (14)

I used the factory lines with my 40k

1Bear

iTrader: (1)

Personally for ease of installation and a permanent no fear of hose failure installation, I too liked the TruCool installation kit from EAD (Time2Kill) that included the brackets and couplings to allow the use of the factory hard lines.

AndysC3

iTrader: (14)

I can move it where I want to, Dont have to worry about leaks between the factory lines and the rubber hose that trucool supplies. And I wanted to bypass the radiator so the braided lines made that easier.

Foxxer

I used a U.S high pressure rated synthetic rubber hose for it, working all fine with no leaks.