Turn key 418" N2O motor
02-10-2017, 04:09 PM
#1
Moderator
Thread Starter
iTrader: (9)
Join Date: Nov 2001
Location: San Jose area
Posts: 2,902
Likes: 0
Received 0 Likes
on
0 Posts
Turn key 418" N2O motor
I still need to pull it out and freshen it up, but I am looking to sell my 418" LS3. It would have:
New bearings (Standard crank and rods)
New Rings
New lifters
This is going to be a turn key deal including:
Two step
N20 controller
Converter
Flex plate
Headers
All tunes from NA to the biggest tune N20 tune up I have used (e-mailed to buyer).
Basically add fuel and power to the harness and let it rip!
Short block
418” LS3
4.083 bore
13-1 compression
Callies 4” crank
Callies 6.125” Rods
Weisco coated pistons (4cc valve reliefs)
LS7 lifters
.080 wall Chrome Alloy Push Rods
Melling high volume oil pump
LS2 timing set
Custom 254/260 cam
ARP main studs
ARP rod bolts
ARP 12 point head studs
Top end
PRC 237 6 bolt heads with hollow intake valve (87 grams)
PAC .660” valve springs
Stock LS rocker with trunnion upgrade
Super Victor intake which has been ported
NX Shark SX2 2 stage 4150 nitrous plate (has been ported for better air flow)
Edelbrock 4150 to dominator adaptor
Edelbrock Dominator Throttle Body
60lb Siemens injectors
Edelbrock fuel rails
Accessories
ATI Super Damper (non AC)
Custom hub on ATI pulley for Vacuum pump drive
Mezeire street pump with 20 hours
2” Stainless headers from Texas-Speed (5th gen F-body)
Hughes SFI Flexplate
8.5” converter for TH pump – Abruzzi (4,600 NA - 6,200 on both N20 kits *Converter is a bit loose for both stages)
All covers included
Truck Oil pan
Stock GM computer
Custom 1 bar SD / 4L80E tune
GM wiring harnes with harness pined for 4L80E
Motor would come with HP Tuners tunes (E85) for:
Naturaly Aspirated
1st stage – 57n jet
1st stage – 76n jet
2nd stage - Two 52n jets
Both stages – 57n in fist and two 52n jets in second
Both stages – 76n in first and two 52n jets in second
Motor moved my 3,200lb truck to :
NA – 10.38 @ 127 (315/60/15 radial 1.49 60’)
1 stage 76n jet – 9.49 @ 138mph (315/60/15 radial 1.35 60’)
2 stage 57n in fist and two 52n jets in second – 9.24 @ 144mph (315/60/15 radial 1.39 60’)
2 stage 76n in first and two 52n jets in second – 9.20 @ 145mph (33x14.50 slick 1.41 60’)
I guess I forgot to put a price..
$13,800
New bearings (Standard crank and rods)
New Rings
New lifters
This is going to be a turn key deal including:
Two step
N20 controller
Converter
Flex plate
Headers
All tunes from NA to the biggest tune N20 tune up I have used (e-mailed to buyer).
Basically add fuel and power to the harness and let it rip!
Short block
418” LS3
4.083 bore
13-1 compression
Callies 4” crank
Callies 6.125” Rods
Weisco coated pistons (4cc valve reliefs)
LS7 lifters
.080 wall Chrome Alloy Push Rods
Melling high volume oil pump
LS2 timing set
Custom 254/260 cam
ARP main studs
ARP rod bolts
ARP 12 point head studs
Top end
PRC 237 6 bolt heads with hollow intake valve (87 grams)
PAC .660” valve springs
Stock LS rocker with trunnion upgrade
Super Victor intake which has been ported
NX Shark SX2 2 stage 4150 nitrous plate (has been ported for better air flow)
Edelbrock 4150 to dominator adaptor
Edelbrock Dominator Throttle Body
60lb Siemens injectors
Edelbrock fuel rails
Accessories
ATI Super Damper (non AC)
Custom hub on ATI pulley for Vacuum pump drive
Mezeire street pump with 20 hours
2” Stainless headers from Texas-Speed (5th gen F-body)
Hughes SFI Flexplate
8.5” converter for TH pump – Abruzzi (4,600 NA - 6,200 on both N20 kits *Converter is a bit loose for both stages)
All covers included
Truck Oil pan
Stock GM computer
Custom 1 bar SD / 4L80E tune
GM wiring harnes with harness pined for 4L80E
Motor would come with HP Tuners tunes (E85) for:
Naturaly Aspirated
1st stage – 57n jet
1st stage – 76n jet
2nd stage - Two 52n jets
Both stages – 57n in fist and two 52n jets in second
Both stages – 76n in first and two 52n jets in second
Motor moved my 3,200lb truck to :
NA – 10.38 @ 127 (315/60/15 radial 1.49 60’)
1 stage 76n jet – 9.49 @ 138mph (315/60/15 radial 1.35 60’)
2 stage 57n in fist and two 52n jets in second – 9.24 @ 144mph (315/60/15 radial 1.39 60’)
2 stage 76n in first and two 52n jets in second – 9.20 @ 145mph (33x14.50 slick 1.41 60’)
I guess I forgot to put a price..
$13,800
Last edited by LIL SS; 02-11-2017 at 12:04 AM.
