Super low mileage 408 stroker up for sale
01-06-2017, 01:45 PM
#1
Staging Lane
Thread Starter
iTrader: (12)
Join Date: Dec 2010
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Super low mileage 408 stroker up for sale
ALL SOLD
408 stroker
Fully assembled long block. Heads, valve covers, oil pan (all covers), intake and throttle body. Has all sensors as well.
6.0 litre LQ4 built for ls1 camaro
Eagle crank
Wiseco -3cc pistons
Callies compstar rods 6.125
Ported snd shimmed LS6 oil pump
Double roller timing set
Texas Speed and Performance cnc port & polished LS3 heads
ARP- head studs, main studs and rod bolts
Cam is 230 intake,242 exhaust, .610 intake .600 exhaust on 114lsa
Compression is 11:1 or 11:3. I'll have to double check. But head gaskets alone can easily lower the compression.
Will sale fully assembled with ls3 intake and 92mmTB.
Engine made 484rwhp when dyno tuned.
Was built for nitrous but never went that route.
Block has under 2000 miles. Heads have less than 1000. Has been babied.
$4500.
If you are in TX, i might be willing to deliver for the right price.
I have many extras for this engine
-Performabuilt stage 2 4l60e with stall converter
- FAST 102 intake and TB
-ATI balancer
-Kooks headers
-MSD coils
-QA1 adjustable shocks for 93-02 fbody
-awesome houndtooth upholstered seats for camaro
-ls1 is going back in the car to sell it.
Everything listed SOLD
408 stroker
Fully assembled long block. Heads, valve covers, oil pan (all covers), intake and throttle body. Has all sensors as well.
6.0 litre LQ4 built for ls1 camaro
Eagle crank
Wiseco -3cc pistons
Callies compstar rods 6.125
Ported snd shimmed LS6 oil pump
Double roller timing set
Texas Speed and Performance cnc port & polished LS3 heads
ARP- head studs, main studs and rod bolts
Cam is 230 intake,242 exhaust, .610 intake .600 exhaust on 114lsa
Compression is 11:1 or 11:3. I'll have to double check. But head gaskets alone can easily lower the compression.
Will sale fully assembled with ls3 intake and 92mmTB.
Engine made 484rwhp when dyno tuned.
Was built for nitrous but never went that route.
Block has under 2000 miles. Heads have less than 1000. Has been babied.
$4500.
If you are in TX, i might be willing to deliver for the right price.
I have many extras for this engine
-Performabuilt stage 2 4l60e with stall converter
- FAST 102 intake and TB
-ATI balancer
-Kooks headers
-MSD coils
-QA1 adjustable shocks for 93-02 fbody
-awesome houndtooth upholstered seats for camaro
-ls1 is going back in the car to sell it.
Everything listed SOLD
Last edited by ucanthangwme; 03-29-2017 at 01:25 PM.
01-07-2017, 02:59 PM
#3
TECH Enthusiast
01-09-2017, 10:10 AM
#6
24x, based on the fact he had it in an LS1 equipped Camaro. Just making inferences.
If you do decide to part it out, I am in NM and I would be interested in making a deal happen on the long block, or the block/rotating assembly. My only concern is the compression ratio. Need to look into how to drop it into the 10.2-10.5 range as I intend to put 12lbs on top of this.
If you do decide to part it out, I am in NM and I would be interested in making a deal happen on the long block, or the block/rotating assembly. My only concern is the compression ratio. Need to look into how to drop it into the 10.2-10.5 range as I intend to put 12lbs on top of this.
