TheBeeblebrox

iTrader: (1)

Selling some of my previous drop parts/set-up;

[all prices +shipping]

6.3" stroke HQ single adj. Coil-Over shocks, some minor cosmetic damage, only 2,200 miles on them when removed, $390 - Sold

Hyper-Co springs also pictured are 14" x 650# also only 2,200 miles, $70 - Sold

4.1" stroke HQ single adj. Coil-Over shocks with trunnion mount (can be used w/stock LCA's), 11,150 miles when removed, $350 - Sold

Hyper-Co 10" x 800# springs ~5k miles when removed, $70 - good spring rate for reg-cab trucks - Sold

Hyper-Co 10" x 900# springs ~6K miles when removed, $70 - good spring rate for ext-cab trucks

TheBeeblebrox

iTrader: (1)

More

7.55" stroke HQ single adj. shocks, sized to fit trucks that have a 5" to 6" drop in the rear, 4k miles when removed, some paint overspray on the shock body, $200 - Sold

BellTech Street Performance rear drop shocks for a 6” drop, ~10-15K miles when removed, $20 - these things suck but somebody might want them??



Spare Coil-Over spring seat/adjuster - free with one of the coil-over sets if you want it. - Sold

Shot in the dark here, one HQ single adj. shock (bottom one) I believe it is a 6.65” stroke shock I only had on the truck for under 1k miles, $100



Not pictured, fancy RideTech spanner wrench, $10 - Sold

also all this **** will be as clean as I can get it before I ship it out, pardon the grungy-ness.

chris99gmc

Did you switch your setup?

Will any of those fit with 4" DJM lca's? Or would it sit too low?

TheBeeblebrox

iTrader: (1)

Yea I went with the full air bag kit from RT

I'm not sure, maybe the 6.1's? I don't know if the DJM arms share similar geometry to ridetech's Strong Arm or not (or if they are strong enough to use a trunnion mount). The 4.1's would definitely be way to low.

settlemoore

iTrader: (1)

Soooooooooooooooo cheap. I've put over 40k miles on my ridetech front coilovers and rear shocks, very much worth it at this price.

casper02

iTrader: (1)

So 350 for the fronts?? And what drop will this get me with stock cont arms plus what else would i need??

TheBeeblebrox

iTrader: (1)

Yes, just the fronts. By themselves the 4.1's net about a 3" drop

You would also need springs, for reg. cab the 10" x 800# springs would be the best.

Thats all you need to run these, check out my thread when I first got them and was still stock (aside from drop spindles): https://www.performancetrucks.net/fo...-800-a-517351/

settlemoore

iTrader: (1)

Here's a side shot of just the 4.1 stroke coilovers, only a few threads left but not all the way down and no drop spindles




Here's a side shot with coilovers in same positon but added drop spindles




This is so cheap lol you might as well just buy the 4.1 stroke ones and the shocks too, 100% worth it

casper02

iTrader: (1)

So what are you looking to get altogether for a regular cab lmk really intrested

TheBeeblebrox

iTrader: (1)

$420 + shipping, I'll say $20 to ship it should be fine, so $440 for the 4.1's and the 800# springs.