99-13 D1SC Procharger kit, ID850 injectors
10-24-2016, 07:08 PM
#1
99-13 D1SC Procharger kit, ID850 injectors
Going with a S480 turbo. So up for sale is my D1 procharger kit. D1SC polished head unit with around 15k miles on it. Works flawlessly and doesn't leak. It was on my 6.2 L92 in my 2000 rcsb 1500. With the 4" pulley it made 11 total psi shifting at 6500 rpm. The 4.25" pulley (comes with the kit as well) made 9psi. Comes with all necessary mounting hardware/brackets/pullies, 2 different size belts (one for the 4" pulley and one for the 4.25" pulley) K&N airfilter.
The cold side uses a FMIC 27"X11"x3" that mounts between the frame rails in the lower bumper. It has a Procharger Big Red Race BOV, 3" piping that steps up to 4" as it approaches the throttle body. Comes with all necessary clamps. Cold side is set up for speed density tuning with a hole tapped in the piping near the throttle body for water/meth injection. Some of the piping is polished and some is a natural finish.
Asking $3500 for the complete procharger kit
*I have a crank pinning kit I will throw in the deal if needed.
I also have a set of ID850 injectors with less than 5000 miles on them. $800
Text me for any questions, for pics, etc. 864-542-655eight
The cold side uses a FMIC 27"X11"x3" that mounts between the frame rails in the lower bumper. It has a Procharger Big Red Race BOV, 3" piping that steps up to 4" as it approaches the throttle body. Comes with all necessary clamps. Cold side is set up for speed density tuning with a hole tapped in the piping near the throttle body for water/meth injection. Some of the piping is polished and some is a natural finish.
Asking $3500 for the complete procharger kit
*I have a crank pinning kit I will throw in the deal if needed.
I also have a set of ID850 injectors with less than 5000 miles on them. $800
Text me for any questions, for pics, etc. 864-542-655eight
Last edited by chvy=power; 10-31-2016 at 11:42 AM.
