older truck running new style 6.2 catback?
#1
TECH Senior Member
Thread Starter
iTrader: (5)
Join Date: Apr 2005
Location: East Coast
Posts: 5,968
Likes: 0
Received 0 Likes
on
0 Posts
older truck running new style 6.2 catback?
After working for Cadillac for a few years, I noticed the new Escalades have a pretty amazing looking stock exhaust system(the 6.2 versions).... I was wanting to adapt that to my 5.3 tahoe. I know I would loose some bottom end torque possibly but, it would be pretty efficient I would think plus work well with my turbo plans.
Anyone do this? Retrofit a new truck/escalade exhaust in an older truck(07)???
Anyone have a stock exhaust laying around?
Anyone do this? Retrofit a new truck/escalade exhaust in an older truck(07)???
Anyone have a stock exhaust laying around?
#2
TECH Senior Member
Thread Starter
iTrader: (5)
Join Date: Apr 2005
Location: East Coast
Posts: 5,968
Likes: 0
Received 0 Likes
on
0 Posts
Basically, what I have is the stock inlet for the muffler PIPE.....and the tail pipe with resonator, off an escalade(08-10 escalade). I'm probably gonna buy the magnaflow 12909 muffler and use the stock escalade exhaust tip/resonator for now.....then when I am caught up with everything, I wanna incorporate twin exit rear system...also like the 2012 escalades since I have some exhaust tips laying around from a corvette project.
..something like this....
...and eventually, the back like this...but not as loud. (I have the same quad tips from another project)
..something like this....
...and eventually, the back like this...but not as loud. (I have the same quad tips from another project)
Thread
Thread Starter
Forum
Replies
Last Post