98FreakZ

iTrader: (1)

Im sure this subject has been beaten into the ground but Im performing a LS6 intake swap onto a 5.3. Ive done the search thing and found some help and great pics but what Im looking for is if someone on here knows how to or just plain makes the idler pulley relocation bracket I need.

I noticed through searching that Speartech used to manufacture one but apparently no longer sell it and I do not have the tools to fabricate my own.

Any help would be greatly appreciated.

Im well versed in the LS1 game but fairly new to the truck scene.

Thanks!

00ChevyScott

iTrader: (10)

Unless you're running up to 6600 RPMs or higher with a big cam, good heads, and a high stall and 4.10s I wouldn't recommend it.

98FreakZ

iTrader: (1)

lol, it's not my truck. Im doing this for a buddy that hasn't got a clue on anything mechanical and just has too much money

00ChevyScott

iTrader: (10)

tell him hes going to lose low end torque and gain basically nothing (from what I've read anyways)

GMCtrk

iTrader: (27)

I'd hold off on the LS6 intake. There is a new LSx intake from a company in Australia that's claiming 30hp/30tq over the ls6 intake. I think it's about $650 msrp. There's a thread on it over on LS1tech

bluecajun5.3

iTrader: (31)

wow just look at the false statements flying

closet red neck

iTrader: (6)

No ****!!

James

00ChevyScott

iTrader: (10)

what false statements.

amadeospike

iTrader: (1)

Here is what I did.

Buy a longer bolt and use a spacer to get the proper alignment.

[IMG][/IMG]

LS6_Silverado

iTrader: (7)

What size belt did you use when you relocated the pully???