You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Just wondering if anyone has ran the Lunati Voodoo series 212/218 on a 113 lsa cam in a 5.3L? Part number is 60510. Has a gross .531/.531 valve lift. Any other thoughts or opinions with this cam in a 2005 Z71? I listed the link below for all of the specs.
I don't know of anyone running that cam, but I like the specs for a daily drive 5.3. The Comp 212/218 (114LSA) is a proven performer, in both the low and high lift versions. If the lobe ramp rates aren't too aggressive, the low lift of that cam should allow for LS6 springs and long spring life
[URL=http://www.cardomain.com/memberpage/648999]My CarDomain Page[/URL]
[FONT=Garamond]99 5.3 Z71 RC/SB - [COLOR="Blue"]FLT Level7 65E[/COLOR], [COLOR="Purple"]Circle-D Billet 258mm 2B Multi-Disc[/COLOR], Comp 206/212 515/520 114, LS6 Springs, Harland Sharp 1.7's, [COLOR="Red"]BlackBear 02 PCM[/COLOR], 02 Injectors, 160* stat, 05 E-fans, Nelson Harness, Volant CAI w/ Ram Air, StainlessWorks Headers and !Catted! Y-Pipe, DMH 3" E-Cutout, 18" Magnaflow dumped over axle, 3.73 G80, Dropped on Gibbs 20's [B]**H/C LQ9, 4.10's, and TruTrac eventually**[/B] [/FONT]