DBW TB wiring diagram?
#4
10 Second Club
Thread Starter
iTrader: (15)
Join Date: Feb 2005
Location: fort worth, tx
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the response bro.
im attempting/researching using a truck/tahoe dbw throttle body on a v6 fbody.
99+ v6's also have dbw but the tb is only 65mm...im looking for at least a 78, more if i can get it.
the v6 unit cant be punched out that far do to the gears/shaft and electronics clearancing in the throat (yeah i tried...LOL)
so yr model is really unimportant to me as long as the throat/blade are larger.
thanks mang!
much appreciated.
im attempting/researching using a truck/tahoe dbw throttle body on a v6 fbody.
99+ v6's also have dbw but the tb is only 65mm...im looking for at least a 78, more if i can get it.
the v6 unit cant be punched out that far do to the gears/shaft and electronics clearancing in the throat (yeah i tried...LOL)
so yr model is really unimportant to me as long as the throat/blade are larger.
thanks mang!
much appreciated.
#5
TECH Addict
iTrader: (7)
Looking at the description and operation for the F-body V6 throttle system, I would say that with respect to the TB itself, the 03 - 06 truck 78mm is the closest match. In both systems the 2 sensor signals move in the same direction, increasing as the throttle opens. Both use 8 wires to the TB. Not sure if the resistance of the TP sensors will match close enough though.
Here are the pinouts for a 2004 truck TB connector. Wire colors for the circuits appear to be similar. As long as the resistance is similar it could work. You may have to swap the TPS1 and TPS2 circuits, possibly not.
Here are the pinouts for a 2004 truck TB connector. Wire colors for the circuits appear to be similar. As long as the resistance is similar it could work. You may have to swap the TPS1 and TPS2 circuits, possibly not.
Trending Topics
#9
10 Second Club
Thread Starter
iTrader: (15)
Join Date: Feb 2005
Location: fort worth, tx
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
thank you sir.
mucho appreciated.
helps a ton.
i can remove the Tac and even the motor from the v6...thats simple enough.
wonder if i could just swap it into the truck tb..hmmm
thank you again.
mucho appreciated.
helps a ton.
i can remove the Tac and even the motor from the v6...thats simple enough.
wonder if i could just swap it into the truck tb..hmmm
thank you again.
Last edited by usd2sing; 09-17-2008 at 08:59 PM.
#10
Hey im trying to do a ls swap in my 2000 4.3 single cab silverado with a 08-13 escalade 6.2l with the 6l80e and I can’t find the adapter to plug into this Interior connector for my dbw for nothing. Do anyone know where can I find it at
Thread
Thread Starter
Forum
Replies
Last Post
Wrecker 426
Tuning, Diagnostics, Electronics, and Wiring
1
09-30-2015 09:39 PM