Reit38

Has anyone tried modding AIRAID MIT tube from a NBS to a NNBS

I know there's a breather tube on the nnbs. So I'd have to drill a hole in the tube and install a barb fitting but is there anything else

madmann26

iTrader: (7)

That should work, in theory. Outside of overall length difference (don't know if there is or not), I don't see it being an issue.

cwalker2006

iTrader: (11)

I took a volant tube from a nbs and put it right on my nnbs. Easy swap

Reit38

How did you hook up the breather tube (not sure what it's called)

E$O3200

iTrader: (1)

If you get the one for trucks with electric fans, it has an indentation where the breather would go. You could just drill it out and install the barb fitting. I can take pics if you need.

Reit38

I believe that's the m.i.t. tube I have. I bought a barb fitting today. Going to see when I get off work if everything lines up in the right spot

A pic would be handy to make sure we're talking about the same thing

Reit38

Looks like the mit tube itself will fit but the breather tube is to short now