4L65E tranny ?
08-19-2014, 09:48 AM
#1
Teching In
Thread Starter
Join Date: Feb 2014
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
4L65E tranny ?
I installed a connect and cruise in my 70 Chev C10. It has LC9 engine and 4L65E tranny.
One of the wires in the harness goes to the brake switch to unlock the TCC which I have not hooked up. I have been told that 12v up the wire causes an unlock. Documentation states its for smoother operation.
As I understand it, the TCC will unlock when it down shifts out of 4th. Truck drives Ok in the test runs.
So question is, what good is it?
I do know some cars can test lock/unlock by lightly pressing brake at highway speeds which this hookup would do.
Thanks
One of the wires in the harness goes to the brake switch to unlock the TCC which I have not hooked up. I have been told that 12v up the wire causes an unlock. Documentation states its for smoother operation.
As I understand it, the TCC will unlock when it down shifts out of 4th. Truck drives Ok in the test runs.
So question is, what good is it?
I do know some cars can test lock/unlock by lightly pressing brake at highway speeds which this hookup would do.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post